- Overview
- Criteria and method
Criteria and method
This page explains how the suppliers in the Canadian edition are found and assessed. The method comes first, then the requirements for facts, and then the search frame for each category.
The search frame is locked before the assessment
For each category, I decide in advance which sources will be searched and which rule decides who is included. The frame is locked before I look at the candidates. If it changes later, the category gets a new version and a line in the changelog.
Only companies are listed; the privacy policy explains which company forms count. The company form is read from the supplier’s own website. Where the website names the company but shows no corporation number, the number may be taken from Corporations Canada or a provincial business register, by exact name or number, and only where the register shows it without a paid search.
The overview includes the suppliers that meet the rule and are found through the sources in the frame. It is not exhaustive. Web searches are used only to find candidates, never as the source of a fact. Every candidate gets an outcome and a reason, including those that are not published.
Where the facts come from
A fact from the supplier keeps the label «Provided by the vendor» even when something else supports it. Before a fact is published, a separate check fetches the source again. If the source does not contain the fact, or cannot be fetched, the fact is not published.
Legal requirements and regulatory status are taken only from official sources: Health Canada’s listings and guidance, federal and provincial legislation, and the pages of the provincial regulators. Drug and medical device databases - Canada.ca (Health Canada)1 A missing record is shown as a gap in the research, not as a finding about the product.
Prices
All prices are in Canadian dollars (CAD), as the source states them. Sales tax is shown as «excl. sales tax (GST/HST/PST)» or «incl. sales tax (GST/HST/PST)» only when the source states it; it is never assumed, because which taxes apply and at what rate depends on the province. A price in another currency keeps its currency code. If no public price was found, the page says so, with the date of the search.
Search frames
Practice management software. Included: software for managing a dental practice that a public source shows is offered to private dental practices in Canada outside Quebec. Sources searched: the Canadian Dental Association’s list of certified software for CDAnet and ITRANS, Software Vendors (CDAnet and ITRANS Certified Vendors) | Canadian Dental Association (Canadian Dental Association (CDA))2 and the vendors’ own Canadian pages. Known gap: software sold only in Quebec or only in French is outside this edition.
Intraoral scanners. Included: intraoral scanner models that a public Canadian page shows practices in Canada can buy, with the seller named: a Canadian dealer, or the manufacturer’s own Canadian shop or Canada-wide site. Sources searched: Health Canada’s MDALL, Medical Devices Active Licence Listing (MDALL) - Canada.ca (Health Canada)3 the manufacturers’ Canadian pages, and the Canadian distributors’ catalogues. Known gaps: models sold only through a reseller with no public page, and distributors whose public catalogue shows no scanner unit (Henry Schein Canada, searched Nov 5, 2026).
Dental distributors. Included: companies that sell consumables, materials, instruments or equipment to dental practices in more than one province outside Quebec. Sources searched: Health Canada’s list of active MDEL holders Medical Device Establishment Licences - Canada.ca (Health Canada)4 and the distributors’ own pages. Known gap: regional and single-province distributors are not included.
CBCT and X-ray units. Included: CBCT, panoramic, cephalometric and intraoral X-ray models that a public source shows practices in Canada can buy, with a named Canadian seller. Sources searched: Health Canada’s MDALL, the manufacturers’ Canadian pages and the Canadian distributors’ catalogues. Provincial X-ray rules, such as Ontario’s, are explained but not assessed. The page stays closed to search engines until at least three companies are verified. Known gap: models sold only through a reseller with no public page.
Quebec. Software, distributors and units sold only in Quebec or only in French are outside this edition. A Quebec edition in French is a later, separate phase with its own legal review.
How many facts are published
Each row in the comparisons shows a badge such as «12 of 15 facts published». The number is how many of the fields below are published for that offering. The badge counts published information, not quality.
By default, offerings are ordered in four steps, and each step counts sourced facts: first the criteria that say what the product is and which need it covers, then the other specifications, then whether a seller or company in the US is named, and last whether the price is public, on request or not found. The number of published facts only decides when everything else is equal, then alphabetical order. For practice management software, the specifications step is the buyer fields: how many of the fields a buyer needs have a source that meets the field's rule. The rules for each field are listed under the category. The «Full specifications available» badge means every product criterion in the comparison has a source, and it moves no one. The filters above the table show what fits your practice. No number in the guide rates quality, and no vendor pays for position or coverage. A sponsored slot, if one is ever shown, is labeled «Sponsored» and sits apart from the order. Offerings Dental Markedsføring owns or has an interest in are counted on the same fields as everyone else. Alphabetical order is always one click away, under «Alphabetical (A–Z)».
The fields that are counted
- Price. Counts when the offering has a public price. «Price on request» and «no public price found» do not count.
- Integrations. Counts when at least one integration is named in the structured data. An empty list does not count.
- Production country. Applies to dental labs. Counts when the production country is stated. «Production country not stated» does not count.
- Local seller. Applies to implant and aligner systems, dental chairs and units, and intraoral scanners. Counts when at least one seller in the market is named. «No local seller found» does not count.
- Criteria for the category. Each criterion that applies to the offering's category and offering type is one field. It counts when the value has a source. A gap does not count. Contract length and cancellation, and where data is processed, are such criteria where they apply to the category. Features (the yes/no criteria in the filter) count too.
Fields that do not apply to the category or the offering type are not part of the number. Within one table, the list is the same for every row. The list for each category is shown under the category.
Requirements for facts
- Every published fact and price has a source, a date and its own source check.
- Prices older than 180 days and other facts older than 365 days must be checked again.
- «No public price found» is published only when the search is described and repeated by a second check.
- Candidates get an outcome: included, excluded, could not be verified, deferred, with a reason (meets the inclusion rule, outside the category, not available in the market, cannot be published with minimal fields, documentation too weak, the source could not be reached, research not finished).
- Provided by the vendor
- the supplier's own statement
- Confirmed in the source
- the source contains the fact (it does not say the fact is true)
- Independently corroborated
- supported by something other than the supplier
- Official source
- law, regulation, authority or official register
Practice management software
Version 2.17, November 5, 2026
Criteria
- Hosting (cloud, local server or both)
- Data export when switching
- Online scheduling (built in or integrated)
- Minimum term and cancellation
- Where data is stored and processed
- Stated response time and support hours
- Conversion from another practice management system
- Regulatory status
- Access to data after the contract ends
- Test conversion before go-live
- Support: hours, channels and language
- Named reference practices with a public source
- On the CDA list of CDAnet/ITRANS certified software : Quoted from the Canadian Dental Association's certified-vendor list, not from the vendor.
- Canadian claims, predeterminations and CDCP (as the vendor states it)
The order: buyer fields
The buyer fields are step two of the default order. First comes what the system is for (hosting and the market's statutory network), then how many of the buyer fields below have a source that meets the field's rule, then a named seller or company in the market, then a public price. The number of published facts only settles a tie, then alphabetical order. Facts outside these fields stay on the page but do not count in step two.
Each field is in one of four states. Independently verified: an official register, an independent source, or a vendor claim we confirmed elsewhere. Documented by the vendor: terms, a data processing agreement, a privacy or security page, technical documentation, a help page, a sample contract, or a dated public pricing page. Stated by the vendor: any other vendor page, such as a sales page. Not disclosed: we found nothing, or the answer is too vague to check, such as “yes”, “available”, “contact sales” or an integration with no name. Not disclosed counts zero.
A field counts once. More facts or more sources for the same field add nothing.
Every fact carries the date we checked the source ourselves. After the field's window it counts zero, but it stays on the page with its date and an “out of date” label. A new date on the vendor's page with no change in content does not restart the window, because the window runs from our own check.
| Field | What it means | Counts when the source is | Window | Accepted | Not accepted |
|---|---|---|---|---|---|
| Price | An amount for the system on a public page, with the date we checked the page. | independently verified or documented by the vendor | 180 days | A pricing page with an amount per month, per provider or per practice. | “Contact sales for pricing”, or a price that only appears in a quote we cannot link to. |
| Contract terms | Minimum term, notice period and what happens when the contract renews. | independently verified or documented by the vendor | 365 days | The vendor's published terms or a sample contract that states the term and notice period. | “Flexible contracts” on a sales page, with no terms. |
| Data location | The country or region where patient data is stored and processed, and whether there is a data processing agreement. | independently verified, documented by the vendor or stated by the vendor | 365 days | A data processing agreement, privacy policy or technical document that names the country or region. | “Secure cloud storage” with no country or region. |
| Data export | How the practice gets its records out when the contract ends: format, deadline and any fee. | independently verified, documented by the vendor or stated by the vendor | 365 days | Terms or user documentation that say which format the data is delivered in. | “You own your data” with no format or process. |
| Insurance claims and e-prescribing | Connection to national e-health services, e-prescribing and electronic claims or reimbursement in the market.Note: In Canada the field is filled by the CDA list of CDAnet/ITRANS certified software and by Canadian claims, predeterminations and CDCP as the vendor states them. | independently verified, documented by the vendor or stated by the vendor | 365 days | An official register entry or a product page that states how electronic claims, eligibility checks or e-prescribing work. | “Built for US practices” with no mention of claims or e-prescribing. |
| Data migration | Whether the vendor moves records in from another system, and whether it offers a test conversion. | independently verified, documented by the vendor or stated by the vendor | 365 days | Documentation that names the systems they convert from, or describes the test conversion. | “We'll get you up and running” with no word on conversion. |
Vendors can ask for a correction. We check the source again, change the fact only if the source says something else, and log the change with its date in the listing's history.
The order, the tools for finding what fits, and any sponsored slot are three different things. The order counts sourced facts. The requirements check and the filters show what fits your practice. A sponsored slot is labeled «Sponsored» and moves no one in the order. None of them gives points or rates quality.
Facts with a source, per criterion
How many of the 5 in the table publish each fact. Sorted by count. Choose a criterion to see which offers state it with a source.
Fewer than half publish this: Stated response time and support hours, Support: hours, channels and language, Data export when switching, Minimum term and cancellation, Regulatory status, Access to data after the contract ends, Test conversion before go-live, Named reference practices with a public source. Ask the supplier in writing before you sign.
Show as a table
| Fact | Published by |
|---|---|
| Hosting (cloud, local server or both) | 5 of 5 |
| Online scheduling (built in or integrated) | 5 of 5 |
| On the CDA list of CDAnet/ITRANS certified software | 5 of 5 |
| Where data is stored and processed | 3 of 5 |
| Conversion from another practice management system | 3 of 5 |
| Canadian claims, predeterminations and CDCP (as the vendor states it) | 3 of 5 |
| Stated response time and support hours | 1 of 5 |
| Support: hours, channels and language | 1 of 5 |
| Data export when switching | 0 of 5 |
| Minimum term and cancellation | 0 of 5 |
| Regulatory status | 0 of 5 |
| Access to data after the contract ends | 0 of 5 |
| Test conversion before go-live | 0 of 5 |
| Named reference practices with a public source | 0 of 5 |
Facts counted in the badge
The same list for every offering in the table. A gap does not count.
- Price
- Integrations
- Hosting (cloud, local server or both)
- Data export when switching
- Online scheduling (built in or integrated)
- Minimum term and cancellation
- Where data is stored and processed
- Stated response time and support hours
- Conversion from another practice management system
- Regulatory status
- Access to data after the contract ends
- Test conversion before go-live
- Support: hours, channels and language
- Named reference practices with a public source
- On the CDA list of CDAnet/ITRANS certified software
- Canadian claims, predeterminations and CDCP (as the vendor states it)
Search frame
Who is included: Dental practice management software with a clinical patient record, offered to private dental practices in Canada outside Quebec, that is on the Canadian Dental Association's list of CDAnet/ITRANS certified software or whose vendor's own page states Canadian claims support. Only companies are listed (corporations, including Inc., Ltd., Corp. and LLC); the company form is read from the vendor's own pages, or from Corporations Canada or a provincial register where they show it without a paid search. Software sold only in Quebec or only in French is outside this edition.
Searched:
- Canadian Dental Association: Software Vendors (CDAnet and ITRANS Certified Vendors) (official source)
- Candidates' own Canadian pages: company form first (footer, terms or privacy page), then product, pricing and support pages (supplier source)
- Web searches in Canadian English (only to find candidates, never as a source) (discovery only)
Known gaps
- Wave 1 (24.10.2026) rests on the CDA list and one or two fetched pages per vendor; most criteria are not yet researched.
- Software sold only in Quebec or only in French is outside this edition.
- Vendors that are on the CDA list but whose own pages were not fetched yet (Power Practice, axiUm, Tracker) are deferred.
Intraoral scanners
Version 1.15, November 13, 2026
Criteria
- Type of scanner
- Price
- Open export (STL, PLY, OBJ)
- Software license and subscription
- Sending scans to the lab
- Service and loaner scanner in Canada
- Wireless
- Intraoral camera or caries aid
- Orthodontic simulation
- Link to chairside milling
- Health Canada medical device licence (MDALL) : Quoted from Health Canada's Medical Devices Active Licence Listing, with the licence number.
- Canadian seller
Facts with a source, per criterion
How many of the 5 in the table publish each fact. Sorted by count. Choose a criterion to see which offers state it with a source.
Fewer than half publish this: Type of scanner, Software license and subscription, Wireless, Open export (STL, PLY, OBJ), Intraoral camera or caries aid, Service and loaner scanner in Canada, Orthodontic simulation, Link to chairside milling. Ask the supplier in writing before you sign.
Show as a table
| Fact | Published by |
|---|---|
| Health Canada medical device licence (MDALL) | 5 of 5 |
| Canadian seller | 5 of 5 |
| Price | 4 of 5 |
| Sending scans to the lab | 3 of 5 |
| Type of scanner | 2 of 5 |
| Software license and subscription | 2 of 5 |
| Wireless | 2 of 5 |
| Open export (STL, PLY, OBJ) | 1 of 5 |
| Intraoral camera or caries aid | 1 of 5 |
| Service and loaner scanner in Canada | 0 of 5 |
| Orthodontic simulation | 0 of 5 |
| Link to chairside milling | 0 of 5 |
Facts counted in the badge
The same list for every offering in the table. A gap does not count.
- Price
- Integrations
- Local seller
- Type of scanner
- Price
- Open export (STL, PLY, OBJ)
- Software license and subscription
- Sending scans to the lab
- Service and loaner scanner in Canada
- Wireless
- Intraoral camera or caries aid
- Orthodontic simulation
- Link to chairside milling
- Health Canada medical device licence (MDALL)
- Canadian seller
Search frame
Who is included: Intraoral scanner models that a public Canadian page shows practices in Canada can buy, with the seller named. The seller can be a Canadian dealer or the manufacturer's own Canadian shop or Canada-wide site. Only companies are listed.
Searched:
- Health Canada: Medical Devices Active Licence Listing (MDALL) (official source)
- Manufacturers' Canadian pages and Canadian distributors' catalogues (supplier source)
- Health Canada MDALL public API (licence, company and device records) (official source)
Known gaps
- Searched Nov 5, 2026: Henry Schein Canada's public catalogue showed scanner tips and sleeves but no scanner unit, and Patterson Dental Canada's site refused automated reading, so neither is listed yet.
- Primescan 2, DEXIS IS 3800W and Straumann SIRIOS X3 have an active MDALL licence, but we found no Canadian page that sells them, and none for Planmeca Emerald or Carestream scanners; a model is added once a Canadian seller page is found.
- 3Shape TRIOS 5 and TRIOS 6 (3Shape's Canadian webshop): held until a public source names the company importing them into Canada (searched Nov 6, 2026).
- Ivoclar VivaScan (Ivoclar's Canadian shop): held until an MDALL licence for it is found; none under that name, searched Nov 6, 2026.
- Models sold only through a reseller with no public page.
Equipment repair and service
Version 2.15, November 16, 2026
Criteria
- Equipment types
- Brands and manufacturers
- Loaner equipment during repair
- Training on the equipment
- Remote support
- Handpiece and instrument repair
- Warranty on repairs
- Sterilizer testing and validation
- Trade-in of old equipment
- Priority response with a service agreement
- Spare parts and support after end of sale
- Installation and service in Canada (provinces) : The provinces and territories outside Quebec where the company states it installs and services equipment, as its own Canadian page states them.
- Service agreements : What a planned maintenance or service agreement includes, as the company states it: visits per year, parts, labour, response times.
- Leasing and financing : Leasing or financing the company offers, or the lender it names, with terms quoted only as the source states them.
- X-ray: help with provincial registration and inspections : What the company states it does for X-ray and CBCT installations, such as acceptance testing, shielding plans or registration paperwork. This is the company's statement; the guide does not state a province's rule.
- Health Canada: establishment licence (MDEL) : Quoted from an exact look-up of a company already found in Health Canada's MDEL listing (company name, licence number and activities only). A missing look-up is a gap in the research, not a finding.
Facts with a source, per criterion
How many of the 5 in the table publish each fact. Sorted by count. Choose a criterion to see which offers state it with a source.
Fewer than half publish this: Brands and manufacturers, Warranty on repairs, Training on the equipment, Service agreements, Leasing and financing, X-ray: help with provincial registration and inspections, Loaner equipment during repair, Remote support, Sterilizer testing and validation, Trade-in of old equipment, Priority response with a service agreement, Spare parts and support after end of sale, Health Canada: establishment licence (MDEL). Ask the supplier in writing before you sign.
Show as a table
| Fact | Published by |
|---|---|
| Installation and service in Canada (provinces) | 5 of 5 |
| Equipment types | 4 of 5 |
| Handpiece and instrument repair | 4 of 5 |
| Brands and manufacturers | 2 of 5 |
| Warranty on repairs | 2 of 5 |
| Training on the equipment | 1 of 5 |
| Service agreements | 1 of 5 |
| Leasing and financing | 1 of 5 |
| X-ray: help with provincial registration and inspections | 1 of 5 |
| Loaner equipment during repair | 0 of 5 |
| Remote support | 0 of 5 |
| Sterilizer testing and validation | 0 of 5 |
| Trade-in of old equipment | 0 of 5 |
| Priority response with a service agreement | 0 of 5 |
| Spare parts and support after end of sale | 0 of 5 |
| Health Canada: establishment licence (MDEL) | 0 of 5 |
Facts counted in the badge
The same list for every offering in the table. A gap does not count.
- Price
- Integrations
- Equipment types
- Brands and manufacturers
- Loaner equipment during repair
- Training on the equipment
- Remote support
- Handpiece and instrument repair
- Warranty on repairs
- Sterilizer testing and validation
- Trade-in of old equipment
- Priority response with a service agreement
- Spare parts and support after end of sale
- Installation and service in Canada (provinces)
- Service agreements
- Leasing and financing
- X-ray: help with provincial registration and inspections
- Health Canada: establishment licence (MDEL)
Search frame
Who is included: Companies that sell, install, service or repair dental equipment for dental practices in Canada outside Quebec (chairs and units, X-ray and CBCT, scanners, sterilizers, compressors and suction, handpieces), and companies that lease or finance dental equipment for those practices, with public information about the Canadian offer. Service coverage is stated per province or territory as the source states it; there are no pages per province, and a company that serves Quebec only is not included. Only incorporated companies are listed, named on their own pages or identified there and matched to their own Corporations Canada or provincial registry entry; sole proprietorships, partnerships and businesses carrying a person's name are excluded without being named, and no people are recorded (owners, technicians, sales representatives, senior officials on registry pages). Financing terms are quoted only as the source states them. For X-ray, the guide records only what the company says it helps with and never states a province's rule.
Searched:
- Corporations Canada federal corporation search and provincial business registries: the company's own entry, found by exact name or number (company fields only) (official register)
- Health Canada: Medical Device Establishment Licence listing (MDEL), exact look-ups of a company already found (company name, licence number and activities only; never the senior official named on the result page) (official register)
- Equipment manufacturers' Canadian dealer and service-partner pages (names to check only) (industry source)
- Web searches in Canadian English, for example «dental equipment repair canada», «dental equipment service ontario» and «dental equipment financing canada» (only to find candidates, never as a source) (discovery only)
- Distributors and equipment sellers already in the Canadian guide (dental distributors, CBCT and X-ray, intraoral scanners) that state service, leasing or financing (re-checked from their own pages) (research lead)
- Candidates' own public pages after the company check: service area, service plans, repair and loaner terms, X-ray and sterilizer support, and financing terms (supplier source)
Known gaps
- Candidates come from reads of the companies' own pages on 7 and 16 November 2026 and a research brief of 16 November 2026 (leads only); every value is captured again and checked by a separate verifier before it is listed.
- promedco.ca did not answer our crawler on 16 November 2026, so ProMed (Burnaby) is not assessed yet.
- henryschein.ca answers 403 from the cloud and pattersondental.ca redirects to the US site, so the two largest dealers' Canadian service and financing pages are read on the Mac.
- No official source on provincial X-ray registration or inspection has been fetched; X-ray support shows the company's own statement.
- Service rates, service-plan prices and lease rates are rarely public.
- Lender licensing has not been checked; financing terms show what the provider states.
- Quebec is outside the scope of the Canadian guide.
Dental distributors
Version 2.14, November 6, 2026
Criteria
- Assortment areas
- Manufacturers the supplier states it represents
- Ordering channels
- Health Canada medical device establishment licence (MDEL) : Quoted from Health Canada's list of active MDEL holders.
- Provinces served and delivery terms
Facts counted in the badge
The same list for every offering in the table. A gap does not count.
- Price
- Integrations
- Assortment areas
- Manufacturers the supplier states it represents
- Ordering channels
- Health Canada medical device establishment licence (MDEL)
- Provinces served and delivery terms
Search frame
Who is included: Companies that sell consumables, materials, instruments or equipment to dental practices in more than one province outside Quebec.
Searched:
- Health Canada: Medical Devices Establishment Licence (MDEL) Listing, searched by company name and licence number (official source)
- Health Canada: Medical Device Establishment Licences (official source)
- Distributors' own Canadian pages: contact, branch, terms, service and about pages (supplier source)
Known gaps
- Patterson Dental Canada holds an MDEL (licence 1019), but its Canadian site returned an error to every request on 5 November 2026, so its seller pages could not be read and it is not listed.
- Medline Sinclair is not listed yet: Health Canada lists licence 159 under Medline Canada Corporation, but Sinclair's own pages name different companies (its accessibility policy a division of Medline Canada, Corporation, its privacy policy Sinclair Dental Co. Ltd.), and its service page prices a maintenance programme we have not yet added (6 November 2026).
- Regional and single-province distributors are not included. Health Canada's listing has 76 active licence holders in Canada with «dental» in the name (5 November 2026); most are single-site businesses or laboratories and have not been checked one by one.
- Quebec is out of scope until the French edition and its legal review exist.
AI receptionists
Version 2.16, November 16, 2026
Criteria
- Books directly in the practice management software
- Opening hours and after-hours calls
- Handoff to staff
- Call recording and transcription
- Cancels and reschedules appointments
- Text message to the patient (confirmation or summary)
- Appointment reminders
- Several languages
- Call statistics and call log
- Answers from the practice's own information
- Handles dental emergencies
- Outbound calls or patient recall
- Chat or text as a channel besides phone
- Minimum term and cancellation
- Stated response time and support hours
- Regulatory status
- Use of call data for model training
- Phone number: forwarding, porting and who holds the number
- Access to data after the contract ends
- Where call data is stored and processed (Canada or elsewhere), and the sub-processors the vendor names : Only what the vendor states on its own privacy, security or sub-processor pages, with the date read. A sales page saying «compliant» is not a statement of location.
- Offer for practices in Canada (page, entity, price in CAD or stated service area) : The source that shows the service is offered to practices in Canada outside Quebec. A US page that never names Canada does not count.
Facts with a source, per criterion
How many of the 4 in the table publish each fact. Sorted by count. Choose a criterion to see which offers state it with a source.
Fewer than half publish this: Cancels and reschedules appointments, Outbound calls or patient recall, Stated response time and support hours, Phone number: forwarding, porting and who holds the number, Regulatory status. Ask the supplier in writing before you sign.
Show as a table
| Fact | Published by |
|---|---|
| Books directly in the practice management software | 4 of 4 |
| Opening hours and after-hours calls | 4 of 4 |
| Handoff to staff | 4 of 4 |
| Call recording and transcription | 4 of 4 |
| Call statistics and call log | 4 of 4 |
| Answers from the practice's own information | 4 of 4 |
| Handles dental emergencies | 4 of 4 |
| Minimum term and cancellation | 4 of 4 |
| Where call data is stored and processed (Canada or elsewhere), and the sub-processors the vendor names | 4 of 4 |
| Offer for practices in Canada (page, entity, price in CAD or stated service area) | 4 of 4 |
| Text message to the patient (confirmation or summary) | 3 of 4 |
| Appointment reminders | 3 of 4 |
| Several languages | 3 of 4 |
| Use of call data for model training | 3 of 4 |
| Access to data after the contract ends | 3 of 4 |
| Chat or text as a channel besides phone | 2 of 4 |
| Cancels and reschedules appointments | 1 of 4 |
| Outbound calls or patient recall | 1 of 4 |
| Stated response time and support hours | 1 of 4 |
| Phone number: forwarding, porting and who holds the number | 1 of 4 |
| Regulatory status | 0 of 4 |
Facts counted in the badge
The same list for every offering in the table. A gap does not count.
- Price
- Integrations
- Books directly in the practice management software
- Opening hours and after-hours calls
- Handoff to staff
- Call recording and transcription
- Cancels and reschedules appointments
- Text message to the patient (confirmation or summary)
- Appointment reminders
- Several languages
- Call statistics and call log
- Answers from the practice's own information
- Handles dental emergencies
- Outbound calls or patient recall
- Chat or text as a channel besides phone
- Minimum term and cancellation
- Stated response time and support hours
- Regulatory status
- Use of call data for model training
- Phone number: forwarding, porting and who holds the number
- Access to data after the contract ends
- Where call data is stored and processed (Canada or elsewhere), and the sub-processors the vendor names
- Offer for practices in Canada (page, entity, price in CAD or stated service area)
Search frame
Who is included: A service that answers or handles incoming phone calls for dental practices with an AI voice that talks to the caller, with public product information, documented as offered to practices in Canada outside Quebec and holding conversations in English. A public source must show all three: the service answers phone calls (chat, text messages, online booking or call analytics alone is not enough); the vendor's own pages are aimed at dental practices (or health clinics with dentistry named) or document an integration with a practice management system in the Canada guide; and the offer applies to practices in Canada (a Canadian page, a Canadian company, prices in CAD, or the vendor's own statement that it serves Canada). A US page that never names Canada does not document a Canadian offer. Phone systems for practices (VoIP) are included only with a documented AI voice feature that answers calls. A vendor based in Quebec is included only when an English Canadian page shows practices outside Quebec are served. Only incorporated companies are listed, including foreign companies, identified by name on the vendor's own footer, terms or privacy page; when the number is not shown it is taken from the company's own entry in Corporations Canada or a provincial registry and linked. Sole proprietorships and partnerships trading under a person's name are excluded without being named, and no people are recorded for included companies (staff, founders, directors). Not included: call answering by people without AI, chatbots on the website, tools that only do online booking, reminders, call analytics or transcription of clinical consultations, general voice bots with no offer to dental practices, plain telephone carriers, and voice AI platforms not sold ready set up. Call recording, data location and privacy show only what the vendor states; we do not assess whether a service complies with a privacy law.
Searched:
- Public partner, integration and app marketplace pages of the practice management systems in the Canada guide (ABELDent, ClearDent, Curve Dental, Dentally, Dentrix) (supplier source)
- Services in the US and UK guides that also state a Canadian offer (re-checked from Canadian pages) (research lead)
- A research brief on AI phone services sold to Canadian dental clinics (16 November 2026), used only to find candidates, never as a source (research lead)
- Web searches and Google autocomplete in Canadian English, for example «ai dental receptionist canada», «ai receptionist dental office» and «dental phone systems» (only to find candidates, never as a source) (discovery only)
- Candidates' own public pages: company name first (footer, terms or privacy page), then product, pricing, privacy policy, security page, sub-processor list and help pages (never about, team or contact pages) (supplier source)
- Corporations Canada federal corporation search and provincial business registries: the vendor's own entry, found by exact name or number (company fields only, never directors) (official register)
- PIPEDA, Schedule 1, clause 4.1.3 (accountability for information transferred to a third party for processing) (official source)
- Office of the Privacy Commissioner of Canada: summary of privacy laws in Canada (provincial laws that may apply instead of PIPEDA) (official source)
Known gaps
- There is no public list of AI phone services for dental practices in Canada. Candidates come from searches on 7 November 2026 and a research brief on 16 November 2026; both are leads only, and every listed fact comes from the vendor's own pages.
- Integration with a named practice management system is usually only the vendor's own claim.
- No official source on recording calls or telling callers they are speaking to AI has been read for any province; recording and disclosure show only what the vendor states.
- No test calls were made and no vendor was contacted; voice quality and real call handling are not assessed.
- Many services publish prices in USD only or no price at all.
- One vendor's pages could not be read by our fetcher on 16 November 2026, so it is not listed yet.
Dental loupes
Version 1.3, November 16, 2026
Criteria
- Optics (Galilean, Keplerian/prism or ergo)
- Price
- Magnifications
- TTL or flip-up
- Working distance
- Weight
- Health Canada: seller's establishment licence (MDEL) and any device licence (MDALL)
- Measuring and fitting in Canada
- Warranty
- Ergo optics with deflected view
- Prescription lenses
- Loupe light
- Loupe camera
- Trial before purchase
- Canadian seller : The company that sells the line to practices in Canada, as a Canadian page names it, with its province. A dealer listed only on the manufacturer's global dealer map is a lead until the dealer's own page names the line.
Facts with a source, per criterion
How many of the 9 in the table publish each fact. Sorted by count. Choose a criterion to see which offers state it with a source.
Fewer than half publish this: Working distance, Ergo optics with deflected view, Weight, TTL or flip-up, Price, Loupe camera. Ask the supplier in writing before you sign.
Show as a table
| Fact | Published by |
|---|---|
| Optics (Galilean, Keplerian/prism or ergo) | 9 of 9 |
| Magnifications | 9 of 9 |
| Measuring and fitting in Canada | 9 of 9 |
| Warranty | 9 of 9 |
| Canadian seller | 9 of 9 |
| Health Canada: seller's establishment licence (MDEL) and any device licence (MDALL) | 8 of 9 |
| Loupe light | 8 of 9 |
| Trial before purchase | 8 of 9 |
| Prescription lenses | 5 of 9 |
| Working distance | 4 of 9 |
| Ergo optics with deflected view | 3 of 9 |
| Weight | 2 of 9 |
| TTL or flip-up | 1 of 9 |
| Price | 0 of 9 |
| Loupe camera | 0 of 9 |
Facts counted in the badge
The same list for every offering in the table. A gap does not count.
- Price
- Integrations
- Local seller
- Optics (Galilean, Keplerian/prism or ergo)
- Price
- Magnifications
- TTL or flip-up
- Working distance
- Weight
- Health Canada: seller's establishment licence (MDEL) and any device licence (MDALL)
- Measuring and fitting in Canada
- Warranty
- Ergo optics with deflected view
- Prescription lenses
- Loupe light
- Loupe camera
- Trial before purchase
- Canadian seller
Search frame
Who is included: One entry per product line of dental loupes (Galilean, Keplerian/prism or ergo with a deflected view, TTL or flip-up) from an identified manufacturer, where a Canadian page shows that dental practices in Canada outside Quebec can buy the line from a named Canadian seller or the manufacturer's own Canadian company. A US page that ships to Canada, or «worldwide» without Canada named, does not document Canadian sales. Only incorporated companies (Inc., Ltd., Corp., Corporation, Limited, ULC) are listed; sole proprietorships and partnerships, and companies trading under a person's name, are excluded without being named, and no people are recorded, including sales representatives named on a dealer page. The company name and form must appear on the seller's own page, or the seller's page must identify the company and the company number is then taken from the official register and linked (rule of 22 Oct 2026). The seller's MDEL is quoted from Health Canada's listing as a licence for the company, never as approval of the loupe. Prices are in CAD as the source states them, with GST/HST only when the source states it. Optical quality and clinical benefit are not assessed. Not in the first version: opticians, operating microscopes, Quebec-only sellers and web shops without an identified company.
Searched:
- Health Canada: Medical Device Establishment Licence listing (MDEL), exact look-ups of a seller already found (company name, licence number and activities only; never the senior official named on the result page) (official register)
- Health Canada: Medical Devices Active Licence Listing (MDALL), exact look-ups of a manufacturer or device name already found (official register)
- Corporations Canada (federal) and the provincial business registries, by exact company name or number (name, number, status and jurisdiction only; never directors) (official register)
- Manufacturers' own Canadian pages and dealer lists for dental loupes and loupe lights, first for Orascoptic, SurgiTel, Univet, ExamVision, Admetec, Q-Optics, Designs for Vision, LumaDent and Bryant (manufacturer source)
- Canadian sellers' own pages (product page, price list, warranty, trial and returns terms) (supplier source)
- Web searches in Canadian English, for example «dental loupes canada» (only to find candidates, never as a source) (discovery only)
- CA loupes research briefs (Perplexity, 6 and 16 Nov 2026), archived in project files: leads only, every fact re-checked from the primary source (research lead)
Known gaps
- On 15 November 2026 we verified Canadian sellers for ExamVision (Synca), Admetec (Andau Medical) and Q-Optics (The Surgical Room). Canadian routes for Orascoptic, Univet, SurgiTel, LumaDent, HEINE and PeriOptix named in our research could not be confirmed from a seller's own Canadian page yet, so those lines are not listed.
- Several manufacturer and seller sites could not be read from our research setup in November 2026 (script-only pages, refused requests, country choosers); they are re-read in a browser before a line is listed.
- We have not confirmed from an official Health Canada source how dental loupes and loupe lights are classified; no class is stated until it is.
- Most sellers give prices only after a fitting or on request.
- Repair location and loaner terms are rarely published.
CBCT and X-ray
Version 1.10, November 10, 2026
Criteria
- Type of unit (CBCT, panoramic, cephalometric or intraoral X-ray)
- Health Canada medical device licence (MDALL) : Quoted from Health Canada's Medical Devices Active Licence Listing, with the licence number.
- Canadian seller
- Field of view sizes (CBCT), as the manufacturer states them
- Image export (DICOM) and viewing software
- Price
- Service and warranty in Canada
Facts with a source, per criterion
How many of the 3 in the table publish each fact. Sorted by count. Choose a criterion to see which offers state it with a source.
Fewer than half publish this: Field of view sizes (CBCT), as the manufacturer states them, Image export (DICOM) and viewing software, Service and warranty in Canada. Ask the supplier in writing before you sign.
Show as a table
| Fact | Published by |
|---|---|
| Type of unit (CBCT, panoramic, cephalometric or intraoral X-ray) | 3 of 3 |
| Health Canada medical device licence (MDALL) | 3 of 3 |
| Canadian seller | 3 of 3 |
| Price | 3 of 3 |
| Field of view sizes (CBCT), as the manufacturer states them | 1 of 3 |
| Image export (DICOM) and viewing software | 0 of 3 |
| Service and warranty in Canada | 0 of 3 |
Facts counted in the badge
The same list for every offering in the table. A gap does not count.
- Price
- Integrations
- Local seller
- Type of unit (CBCT, panoramic, cephalometric or intraoral X-ray)
- Health Canada medical device licence (MDALL)
- Canadian seller
- Field of view sizes (CBCT), as the manufacturer states them
- Image export (DICOM) and viewing software
- Price
- Service and warranty in Canada
Search frame
Who is included: CBCT units and dental X-ray units (panoramic, cephalometric and intraoral) that a public source shows practices in Canada outside Quebec can buy, with a named Canadian seller and an active MDALL licence for the model, quoted with the licence number. One row per model, with manufacturer, model and Canadian seller kept apart. A distributor seller's medical device establishment licence (MDEL) is recorded when the listing shows one. Only companies are listed; the company form is read from the seller's or manufacturer's own pages, or from a free federal or provincial register.
Searched:
- Health Canada: Medical Devices Active Licence Listing (MDALL), licence, device and company records (official source)
- Health Canada: Medical Devices Establishment Licence (MDEL) listing, searched by licence number and company name (official source)
- Canadian sellers' own product pages for CBCT and X-ray units (Canadian address on the page) (supplier source)
- Manufacturers' Canadian pages and distributor lists (names to check, not facts) (supplier source)
- Provincial texts: Ontario Healing Arts Radiation Protection Act and X-Ray Safety Code (Reg. 543), RCDSO, Alberta's radiation equipment registration pages, WorkSafeBC OHS Regulation Part 7 (context for the page, never a listing source) (official source)
- Web searches in Canadian English (only to find candidates, never as a source) (discovery only)
Known gaps
- Searched 5-6 November 2026: MDALL lists active licences for Planmeca (Viso, ProMax), Carestream (CS 9600, CS 8100 3D) and DEXIS (OP 3D) units, but no current Canadian page naming one of these models together with its Canadian selling company could be read: Patterson's Canadian site refused every request, Planmeca's Canadian dealer list names only Henry Schein Canada branches, and Carestream's Canadian pages name its US company only.
- Vatech Canada (Mississauga) sells the Vatech Green X 21 as the Canadian branch of the manufacturer, but no page we read names the Canadian company that imports and invoices it; it is not listed until that is sourced.
- A Concord, Ontario dealer features the Morita Veraview X800, but its site says some products may not be available for sale in Canada and the product page asks buyers to contact it for availability; it is not listed until a current source settles that.
- A Ray Canada Inc. page lists RAYQuantum, which has its own MDALL licence, but shows no Canadian address; it is not listed until one is sourced. The Ray RayScan Alpha Plus is listed through Hatch Group Inc.
- Provincial X-ray rules differ by province; the page quotes Ontario, Alberta and British Columbia sources only and tells practices elsewhere to ask their provincial regulator.
- Quebec and French are a later, separate phase with a legal review.
Autoclaves
Version 1.8, November 11, 2026
Criteria
- Cycle types (class B, N or S), as the manufacturer or seller states them : A cassette autoclave with no stated class is shown as the maker describes it; we never assign a class.
- Chamber volume
- Maximum load
- External dimensions and weight
- Cycle documentation (USB, network, Wi-Fi, app)
- Maintenance interval
- Canadian seller : The company that sells the model to practices in Canada outside Quebec, as its own Canadian page names it, with its province.
- Health Canada device licence (MDALL) : Licence number, class and licence holder from an exact MDALL look-up of the device or company. A missing look-up is a gap in the research, not a finding.
- Price (CAD) : As the source shows it to a visitor in Canada; GST or HST only when the source states it. An amount hidden in page code is not a public price.
- Warranty
Facts with a source, per criterion
How many of the 7 in the table publish each fact. Sorted by count. Choose a criterion to see which offers state it with a source.
Fewer than half publish this: Maintenance interval, Warranty. Ask the supplier in writing before you sign.
Show as a table
| Fact | Published by |
|---|---|
| Cycle types (class B, N or S), as the manufacturer or seller states them | 7 of 7 |
| Cycle documentation (USB, network, Wi-Fi, app) | 7 of 7 |
| Canadian seller | 7 of 7 |
| Health Canada device licence (MDALL) | 7 of 7 |
| Price (CAD) | 7 of 7 |
| Chamber volume | 6 of 7 |
| External dimensions and weight | 6 of 7 |
| Maximum load | 5 of 7 |
| Maintenance interval | 2 of 7 |
| Warranty | 2 of 7 |
Facts counted in the badge
The same list for every offering in the table. A gap does not count.
- Price
- Integrations
- Local seller
- Cycle types (class B, N or S), as the manufacturer or seller states them
- Chamber volume
- Maximum load
- External dimensions and weight
- Cycle documentation (USB, network, Wi-Fi, app)
- Maintenance interval
- Canadian seller
- Health Canada device licence (MDALL)
- Price (CAD)
- Warranty
Search frame
Who is included: Tabletop steam sterilizers (autoclaves) for dental practices that a Canadian page offers to practices in Canada outside Quebec, with manufacturer, model and Canadian seller kept apart. One row per model. Specifications come from the manufacturer where it publishes them, otherwise from the seller, and the source is shown. The model must have an active Health Canada device licence found in MDALL, or the row says the look-up is missing. A dealer found only on a manufacturer's dealer map is a lead until its own Canadian page names the model. Only companies are listed, never people. Sterilization performance and clinical quality are not assessed.
Searched:
- Manufacturers' own Canadian or North American product pages and their Canadian subsidiaries' pages (manufacturer source)
- Canadian sellers' own product, service and terms pages for the model (supplier source)
- Health Canada: Medical Devices Active Licence Listing (MDALL), exact look-ups of a device or company already found (official register)
- Corporations Canada and provincial business registries: the seller's own entry by exact name or number (company fields only) (official register)
- Web searches in Canadian English, for example «dental autoclave canada» and «autoclave for dental office» (only to find candidates, never as a source) (discovery only)
Known gaps
- Henry Schein Canada (henryschein.ca) returns 403 to our cloud reader; its autoclave range is not checked yet.
- Patterson Dental Canada now serves pattersondental.com/en-CA, and its robots.txt disallows the product pages, so we do not cite them.
- Sinclair Dental lists STATIM, BRAVO, Midmark M9/M11, W&H Lexa and Tuttnauer T-Top pages in its Canadian sitemap, but the pages load their content in the browser; a browser capture on the Mac is pending. Until then the makers' own channels are the only Canadian sellers listed.
- Midmark M9 and M11 (MDALL licence 2597, active): no Canadian seller page read yet.
- Flight Dental Systems CLAVE B: no MDALL device named CLAVE B, and the site shows no legal company name. Held.
- MELAG and Euronda: no MDALL company or device match on 7 Nov 2026, so not listed for Canada.
- Tuttnauer T-Top 10: no Canadian seller page and no model-level MDALL match found.
- No seller is confirmed in Corporations Canada yet; the federal search found none of the three, which are likely provincial corporations (Ontario registry not readable from the cloud).
Sources
Numbered by first appearance on the page. The date is when the source was last checked.
- Drug and medical device databases - Canada.ca, Health Canada. Checked October 24, 2026. Official sourceConfirmed in the source
- Software Vendors (CDAnet and ITRANS Certified Vendors) | Canadian Dental Association, Canadian Dental Association (CDA). Checked October 24, 2026. Official sourceConfirmed in the source
- Medical Devices Active Licence Listing (MDALL) - Canada.ca, Health Canada. Checked October 24, 2026. Official sourceConfirmed in the source
- Medical Device Establishment Licences - Canada.ca, Health Canada. Checked October 24, 2026. Official sourceConfirmed in the source