- Overview
- Intraoral scanners
- Digital impressions vs traditional impressions: what changes for your practice
Digital impressions vs traditional impressions: what changes for your practice
In short
A digital impression creates a 3D scan file that can be sent to the lab electronically instead of shipping a physical impression. The switch moves your costs from material per case towards a scanner investment plus, for some models, a yearly plan. Of the eight scanners we list, two have a public US price: the 3Shape TRIOS 6 Wireless configuration on its webshop at $33,650, taxes and shipping not included (checked October 18, 2026), and Runyes QuickScan IOS at $8,995 for the scanner alone at OsseoDent (read October 31, 2026). Our view: price the plan that follows the first year before you price the scanner, because at low volume the plan decides whether a scanner pays.
In this article
- The yearly plan comes first
- Five years of a TRIOS 6 Wireless, worked out
- The tray side of the sum
- What changes chairside and at the lab
- Are digital impressions more accurate than traditional impressions?
- Do all dental labs accept digital impressions?
- Can digital impressions be used for crowns?
- Can digital impressions be used for clear aligners?
A digital impression is a 3D scan of the teeth and gums, taken with an intraoral scanner and sent to the dental lab as a file. A traditional impression is a tray of material that sets in the mouth and goes to the lab, or gets poured into a model in-house.
Our position: for a practice that takes few impressions a month, a scanner is a workflow decision first and a cost decision second, and the running plan matters more than the sticker price. Two of the eight scanners we list have a maker-published running plan that follows the purchase, and only two of the eight show a public US price. So before any demo, we would get the yearly cost after the first year in writing and set it against what trays, material and shipping cost you today. The opposite holds for a busy restorative or aligner practice whose labs already take scan files: there, the case for scanning rests on volume, and the plan is a smaller share of each case.
The yearly plan comes first
When we checked on October 18, 2026, one scanner configuration had a public US price, from 3Shape: Published on the US webshop: one-time payment $33,650 for the configuration shown, or 3Shape Installments over 24-60 months; taxes and shipping not included1 After the first year: First year of TRIOS Care included; after the first year TRIOS Care costs $219/month, or the practice can downgrade to TRIOS Only (free service agreement); 3Shape app subscriptions take effect after one year2
Dentsply Sirona is just as clear about Primescan 2, though without a figure: Primescan 2 requires a paid subscription to DS Core3 We searched on the same date and found no public US price for iTero Lumina, DEXIS IS 3800W or Medit i900. We added three models on October 31, 2026: OsseoDent lists Runyes QuickScan IOS at $8,995 one-time sales tax not stated4 for the scanner alone, Aurident quotes the Shining 3D Aoralscan 3 on request, and we found no public price for Straumann SIRIOS X3.
That leaves a practice with two public scanner prices and one plan price among eight scanners. Everything else arrives in a quote, which is why the plan question belongs at the start of the conversation rather than after the demo.
Five years of a TRIOS 6 Wireless, worked out
To show how much the plan weighs, here is our own arithmetic on 3Shape’s published US figures. The five-year horizon is our assumption, not 3Shape’s, and taxes, shipping and any 3Shape app subscriptions are left out because no amounts are published for them on this page.
| Line | With TRIOS Care from year 2 | Downgraded to TRIOS Only |
|---|---|---|
| Scanner, one-time payment | $33,650 | $33,650 |
| Plan, months 13 to 60 (48 × $219) | $10,512 | $0 |
| Total over five years | $44,162 | $33,650 |
| Per month over 60 months | about $736 | about $561 |
The plan adds about 31 percent to the scanner price over five years. Whether that is worth paying depends on what TRIOS Care covers for your practice, which is a question for the seller; what the table shows is that the choice between keeping and dropping the plan moves the monthly figure by roughly $175.
The tray side of the sum
With traditional impressions, cost follows each case: trays, impression material, handling, shipping, the time involved, and remakes caused by impression problems. Your own supply invoices and lab statements give you that figure; nothing public does.
A fair comparison puts both sides on a monthly basis. On the traditional side: cost per impression × impressions per month, plus staff time and remakes. On the digital side: one of the monthly figures from the table above (or the equivalent from a written quote), plus per-scan costs such as tips and lab portal fees, staff time, and the rescans and remakes you still expect. We would leave the remake saving at zero unless your lab’s remake reasons show impression problems as a cause, because not every current remake disappears. The intraoral scanner cost guide breaks the digital side down model by model.
At $561 to $736 a month on the figures above, a practice taking a handful of impressions a month will struggle to make the numbers meet. That is where trays keep their place. They also stay useful as a backup when the scanner is out for repair, for a case the clinician finds hard to scan, and for any lab that does not accept files from the scanner you are considering.
What changes chairside and at the lab
| Step | Traditional impression | Digital impression |
|---|---|---|
| Capture | Tray and impression material | Scanner wand |
| Check | Inspect the set impression | Review the 3D model on screen with the patient still in the chair |
| Prepare | Handling instructions from the lab and the material maker | Prescription details entered in the scanner software |
| Send | Ship the impression or a model | Send the file through the maker’s portal or as an open file |
| Store | Physical models, under your retention rules | Scan files, on the practice computer or in the maker’s cloud |
Storage is the line that varies most by scanner. For Primescan 2, Dentsply Sirona states: Wireless intraoral scanner without dedicated hardware: used with any computer, laptop, tablet or other mobile device with an internet connection; scan data is captured directly on the DS Core cloud platform5 Some scanners save to the practice computer instead, which changes who is responsible for backups.
More of the work also moves to whoever scans, so training time comes before any time saving. Your lab has to be set up to receive files from your scanner, either through the maker’s portal or as open files; our guide to sending intraoral scans to the lab covers both routes. If you offer clear aligners, the same question applies to each aligner system: the clear aligner systems page lists them.
Are digital impressions more accurate than traditional impressions?
This page carries no accuracy evidence, and we have not reviewed accuracy studies for it. An accuracy figure in a brochure is the maker’s own claim. Evidence that means something for your practice covers your case types, the exact scanner and software version, and the scanning workflow used.
Do all dental labs accept digital impressions?
No single answer covers every lab. Labs differ in which maker portals they have accounts on and which file formats they accept, and that list is worth having from each of your labs before a scanner is chosen. The intraoral scanners page compares the eight models we list.
Can digital impressions be used for crowns?
Yes. For a crown, the scan takes the place of the impression of the preparation, the opposing arch and the bite, and the lab designs the crown from the file. The labs we list accept scans from the common systems. National Dentex: Accepts digital impression scans from major intraoral scanner systems, including CEREC, iTero, 3Shape TRIOS, Planmeca/E4D Technologies and Carestream CS6. DDS Lab: Accepts open .STL exports and digital scans from Sirona CEREC, iTero, 3Shape TRIOS, Carestream and 3M True Definition7.
Turnaround is where a lab’s own statements are worth reading. Glidewell: States that BruxZir Zirconia cases require 3 days in lab regardless of impression method, with a Next-Day BruxZir option available8. Dandy, which runs a digital-only workflow: States 5-day or 6-day turnaround for posterior zirconia crowns and under 10 days for 2-appointment digital dentures9. So a scan does not by itself make a crown faster; the lab’s process does. Before you count on a saving, ask your crown lab how its remakes split between scanned and conventional cases, and which of your scanner’s files it takes without a portal fee. The dental laboratories page compares the labs.
Can digital impressions be used for clear aligners?
Yes, where the aligner provider accepts scans from your scanner. Acceptance is set by each aligner provider, scanner by scanner and format by format, so it is part of the same pre-purchase check as your labs.
See the comparison with sources and dates: Intraoral scanners.
Related articles
- DEXIS vs iTero: DEXIS IS 3800W and iTero Lumina compared
DEXIS vs iTero for US practices: DEXIS IS 3800W and iTero Lumina side by side on buying, computer, wireless use, warranty, service plan and caries aid, sourced.
- How to send intraoral scans to the lab: files, platforms and checks
How to send intraoral scans to the lab: STL, PLY and OBJ explained, open vs closed workflows, what scanner makers publish, and a checklist for each case.
- Intraoral scanner cost in 2026: price, yearly fees and payback
Intraoral scanner cost for US practices: published prices, computers, subscriptions and service plans for eight models, plus a five-year payback worksheet.
- iTero vs TRIOS: iTero Lumina and 3Shape TRIOS 6 Wireless compared
iTero vs TRIOS for US practices: iTero Lumina and 3Shape TRIOS 6 Wireless side by side on price, computer, service plan, ortho tools and caries aid, sourced.
Own the practice? Request a Clinic Growth Scorecard
See where your practice is losing new patients to local competitors: Google search and ad visibility, online scheduling conversion gaps and website improvements. Answer three quick questions and Dental Markedsføring will send the scorecard by email.
Sources
Numbered by first appearance on the page. The date is when the source was last checked.
- 3Shape - Configurator (webshop.3shape.com). Checked October 18, 2026. Provided by the vendorConfirmed in the source
- 3Shape - Configurator (webshop.3shape.com). Checked October 18, 2026. Provided by the vendorConfirmed in the source
- Primescan 2 | Dentsply Sirona USA (dentsplysirona.com). Checked October 18, 2026. Provided by the vendorConfirmed in the source
- Price information (osseodent.com). Checked October 31, 2026. Confirmed in the source
- Primescan 2 | Dentsply Sirona USA (dentsplysirona.com). Checked October 18, 2026. Provided by the vendorConfirmed in the source
- Digital Dentistry with a North American Dental Lab (nationaldentex.com). Checked October 28, 2026. Provided by the vendorConfirmed in the source
- How to Send a Digital Dental Lab Impression With DDS Lab (ddslab.com). Checked October 28, 2026. Provided by the vendorConfirmed in the source
- Zirconia Crown - BruxZir® Zirconia Crowns and Bridges (glidewelldental.com). Checked October 28, 2026. Provided by the vendorConfirmed in the source
- Lab Services | Dandy (meetdandy.com). Checked October 28, 2026. Provided by the vendorConfirmed in the source