Skip to content

Refurbished dental equipment in the US: a checklist before you pay

By Ole Tom Pettersen, Dental Markedsføring · published · page last reviewed

In short

Buying refurbished dental equipment goes wrong in the paperwork more often than in the function test. Our view: get the papers first (serial number, service history, test records, lien status and a written warranty) and only then spend a day on the function test; a seller who cannot produce them has answered the question.

Refurbished dental equipment is sold with very different amounts of work behind the word, so a checklist has to cover what you can prove on paper as well as what you can see running. This one is for the whole office, from the mechanical room and the sterilizer to imaging and the scanner. For chairs, the part-by-part inspection is on our page about refurbished dental chairs.

Our view: ask for the papers before you book a visit or pay a deposit. The serial number, the service history, the last waterline and sterilizer test records, proof that no lender has a claim on the unit, and the warranty text can all be sent by email. If they do not arrive, the function test is not worth the trip.

The checklist

What to getWhy it mattersWhere the standard comes from
Make, model, serial number and yearAn authorized dealer needs the serial number to tell you if parts still existMakers route parts through dealers: A-dec's US & Canada site refers practices to their local authorized A-dec dealer for quotes and replacement parts1
FDA listing of the modelConfirms the maker listed the device for the US marketSearch Registration and Listing | FDA (U.S. Food and Drug Administration (FDA))2
Service history and who did the workShows what was replaced and by whomAsk the refurbisher; we have no US definition of “refurbished” to cite
Operator’s manual and water system documentsYou need the maker’s maintenance routine from day oneTimed flush is standard on both A-dec 500 Pro versions; the page lists an A-dec Self-Contained Water System and an A-dec Waterline Maintenance Guide among the delivery system documents3
Last waterline test resultShows the lines meet the target the CDC setsCDC page linked in the waterline section below
Sterilizer spore test logShows the sterilizer has been monitoredCDC page linked in the sterilizer section below
X-ray report of assembly and last state inspectionThe new installation needs its own report21 CFR 1020.30, linked in the X-ray section
Lien and lease statusA financed unit may still belong partly to a lenderAsk for a payoff letter or a written statement
Warranty and return terms in writingDecides who pays for the first failureSupplies can be returned or exchanged within 30 days of purchase; unopened supplies within a year for exchange or credit; equipment only within 30 days (opened/used equipment limited to 1 unit with a 20% restocking fee)4
Freight, rigging and installation as separate linesThese are often outside the priceFreight and installation are not included in the price; all Boyd equipment is quoted FOB Clearwater, Florida; Boyd uses a network of 300+ technicians across North America for warranty and non-warranty service5

Papers that identify the unit

Start with the data plate. Make, model, serial number and year of manufacture let the authorized dealer for that brand look the unit up, and they let you search the FDA’s registration and listing database for the model. Scanner makers’ listings show what such an entry holds, for example FDA registration and listing (openFDA): Shining 3D Tech Co.,Ltd. (China) lists «Aoralscan 2, Aoralscan 3, Intelliscan 3X, ez2scan, Detection Eye» under product code NOF (optical impression system for CAD/CAM of dental restorations)6.

The service history is the second paper. A refurbisher should be able to list what was inspected, repaired and replaced. Where the seller is a practice rather than a refurbisher, the dealer that serviced the unit may hold the records, so ask for that dealer’s name. Benco, for one, states this about its field service: Benco states it has a national team of field service technicians covering all 48 states, with manufacturer's training, for equipment repair and maintenance7.

Waterlines and water hygiene

A delivery system or a cuspidor carries its previous owner’s biofilm risk with it. The CDC’s dental infection control page sets the target, when we read it on 5 November 2026, as water that meets “drinking water standards (i.e., ≤500 CFU/mL of heterotrophic water bacteria)”, says that a water-bottle system on its own is not enough, and tells practices to “Follow recommendations for monitoring water quality provided by the manufacturer of the unit” (CDC, Dental Unit Water Quality).

So ask for the last test result, which treatment product the unit has run on, and whether the tubing was replaced during refurbishment. Units differ in what they have built in; the Intego, for example, is described like this: Automatic purging of all instrument waterlines on the dentist and assistant side; a water bottle for controlled water quality can be filled with Dentosept solution for permanent disinfection; a cleaning adaptor flushes saliva ejector and HVE tubing8. Plan a shock treatment and a test of your own after installation, before the first patient.

Sterilizers and autoclaves

A used sterilizer should come with a monitoring record. The CDC’s sterilization monitoring page says, when we read it on 5 November 2026, that “A spore test should be used at least weekly to monitor sterilizers”, and that practices should keep mechanical, chemical and biological records as long as state and local rules require (CDC, Sterilization Monitoring). Ask for the seller’s recent spore test log and the last service report. Then run your own spore test once the unit is installed, and keep that result as the first line in your log.

Small equipment like sterilizers and ultrasonic cleaners can usually go to a repair center if it fails in the first months. Burkhart runs one: Operates a Handpiece Repair Center alongside in-office equipment repair9. Find out whether the repair center you plan to use takes that exact model before you buy it.

X-ray, pano and CBCT

Imaging is the item where the installer matters as much as the unit. The federal performance standard for diagnostic X-ray systems states, when we read it on 5 November 2026, that “All assemblers who install certified components shall file a report of assembly”, sent to the purchaser and, where applicable, to the state radiation protection agency “within 15 days following completion of the assembly” (21 CFR 1020.30, eCFR). Registration and inspection after that are state matters, which we have not read state by state.

From the seller, get the previous report of assembly and the last state inspection. From the installer, get in writing that it will assemble and test the unit, file the report and tell you which state registration steps stay with you.

Liens, leases and who owns it

All 4 national dealers we compare finance equipment, so a used unit may still sit under a loan or lease and not be the seller’s to sell. Dealer financing terms show why this matters: Patterson, for example, states Equipment and technology financing through Patterson Dental Supply, Inc.: 100% financing up to $750,000, application-only up to $500,000 with no financials required, terms up to 7 years, no early termination penalties or blanket liens, plus EasyEquip interest-free financing on purchases up to $30,000 (three equal payments over 60 days)10. Not every lender works that way, so ask the seller for a written statement that the unit is free of any lien or lease, or a payoff letter from the lender that the sale will settle.

Installation, service and the warranty

Agree who installs and who services before you agree a price. The installer connects air, water, vacuum and power and should test the unit in your building; the service company needs to accept that model. While a used unit is out for repair, a loaner is worth having: Henry Schein lists one, Lists emergency rental equipment among its In-Office Equipment Service offerings11.

The warranty should name who honors it, what it covers (parts, labor or both), for how long, and who does the work locally. A maker program can set a high bar: A-dec’s Certified Pre-Owned site stated “Backed with a 3-year parts warranty” when we read it on 5 November 2026 (A-dec Certified Pre-Owned). Hold other offers against that. Why the service side decides whether used equipment pays at all is set out in our article on used dental equipment.

What does refurbished mean for dental equipment?

It means whatever the seller’s own description says. We have no US definition to cite, and the A-dec program describes its work in its own words: “Inspected and refurbished by A-dec technicians” (A-dec Certified Pre-Owned), without listing which parts are replaced. Treat the word as a starting point and the written list of work as the real definition. If refurbished units go into a new office, set them next to the published prices in how much it costs to start a dental practice; the dealers who quote and service them are compared on our dental equipment suppliers hub, and the questions to put to each dealer are in how to choose a dental equipment supplier.

Get quotes from matched suppliers

Send every supplier the same need, budget and date, so the quotes come back close enough to compare.

Suppliers you want quotes from

Pick one or more.

Every supplier, with brands, service and financing, is in our list of dental equipment suppliers in the US: dealers, service and financing.

See the comparison with sources and dates: Equipment service and financing.

Related articles

All articles for dental practices

Offer from Dental Markedsføring, publisher of the guide

Own the practice? Request a Clinic Growth Scorecard

See where your practice is losing new patients to local competitors: Google search and ad visibility, online scheduling conversion gaps and website improvements. Answer three quick questions and Dental Markedsføring will send the scorecard by email.

What is your role?

Sources

Numbered by first appearance on the page. The date is when the source was last checked.

  1. A-dec 400 Dental Chair | Versatile & Strong (a-dec.com). Checked October 18, 2026. Provided by the vendorConfirmed in the source
  2. Search Registration and Listing | FDA, U.S. Food and Drug Administration (FDA). Checked October 28, 2026. Official sourceConfirmed in the source
  3. A-dec 500 Pro Delivery Systems (a-dec.com). Checked October 18, 2026. Provided by the vendorConfirmed in the source
  4. Return Policy - Supplies, Equipment & Handpieces | Safco Dental Supply (safcodental.com). Checked October 18, 2026. Provided by the vendorConfirmed in the source
  5. FAQ | Get Your Questions Answered Today — Boyd Industries (boydindustries.com). Checked October 18, 2026. Provided by the vendorConfirmed in the source
  6. FDA registration and listing (openFDA) (api.fda.gov). Checked October 31, 2026. Confirmed in the source Company and device fields only. A listing is not an FDA approval or clearance.
  7. Service, Parts and Repairs | Benco Dental (benco.com). Checked October 18, 2026. Provided by the vendorConfirmed in the source
  8. Intego Dental Chair | Dentsply Sirona USA (dentsplysirona.com). Checked October 18, 2026. Provided by the vendorConfirmed in the source
  9. Service, Maintenance & Repair - Burkhart Dental Supply (burkhartdental.com). Checked October 28, 2026. Provided by the vendorConfirmed in the source
  10. Dental Equipment & Technology Financing | Patterson Dental (pattersondental.com). Checked October 28, 2026. Provided by the vendorConfirmed in the source
  11. About In-Office Service - Henry Schein Dental (henryschein.com). Checked October 28, 2026. Provided by the vendorConfirmed in the source